AMMO MIG 7522 Cobra Motor Paints - Chrome Velgen Acryl Set 3x30ml Paint set

This color set has been selected to paint wheels with chrome rims, a common feature on many cars. First you need to apply a base coat with A.MIG-0342 Black Gloss Primer, let it dry for 24 hours and then rub the surface with A.MIG-0343 Chrome Effect for Black Gloss. We recommend a cotton swab or soft cloth for this.

With the reference A.MIG-0343 Rubber we get the exact appearance of a tire. You can apply it to any surface, whether plastic or rubber.
Cobra Motor's range of paints are formulated with the highest quality controls, resulting in highly durable products with extremely vibrant colours. Thanks to their new formula, they can be applied with a brush straight from the bottle or with an airbrush diluted with A.MIG-2263 Cleaner & Thinner lacquer thinner. In both cases you will obtain a smooth and uniform surface with little effort.

These colors are matched to the colors used in the most famous cars of all time, delivering a completely professional result, as well as the most accurate tones possible.

This reference contains the following products:

A.MIG-0338 Cobra Engine Rubber
A.MIG-0342 Cobra Motor Black Gloss Primer
A.MIG-0343 Cobra Motor Chrome Effect for Black Gloss

With the Cobra Motor range of colours you can paint any zone of the vehicles, not only the bodywork but also the interiors, engines, rims, tyres, lights, exhausts, trims and any other detail of your favourite vehicles.
Cobra Motor paints are acrylic based, but when airbrushed and diluted they behave like lacquers, thanks to their great resistance, covering capacity and fluidity. They also have a great self-levelling capacity which makes them very easy to use with both airbrush and brush. The biggest difference with other paints for car modelling is that they are non-toxic, which will allow you to reduce the toxic part of your hobby only to the lacquering phase. Another great advantage is that as they require dilution, the cans have a much higher yield than other brands of paints, so that one jar can be used for 4 or more models.

Application tips for Cobra Motor paints:

-Dilute Cobra Motor paints in the proportion you prefer, normally between 30% and 60%, with its thinner A.MIG-2260 Cobra Motor Thinner & Cleaner or with A.MIG-2000 Acrylic Thinner, it doesn't matter. To use them with a brush you can apply them undiluted or diluted with a little water.

-Hold the model with a support on the inside, so that you never touch it with your fingers, as this can create craters or imperfections in the lacquer. Use gloves that are completely clean of talcum powder and dirt.

-Approximate air pressure: 1.5 bar-22 psi.

-Drying time to touch at 20°C: 20 minutes.

-Curing time: 24 hours.